INTEK M-150 - Statie radio CB 27MHz
New FRONT SPEAKER DESIGN CB radios, the latest INTEK series of stateof- the-art CB (27 MHz) mobile transceivers, with advanced software and hardware design, specifically conceived for Citizen Band operators and for car & truck drivers. 8 bands programmable multi standard circuit design, matching the frequency & operating mode requirements of various countries. 3W front speaker for strong and clear direct audio sound. A number of unique features makes this radio one of the most advanced and sofisticated mobile CB transceiver in the market. One radio only, ready for use in all the European countries !
 
Features
 • MULTI STANDARD CIRCUIT DESIGN
 • ALL EUROPEAN BANDS
 • 3-DIGIT BAND / CHANNEL DISPLAY
 • FIXED OR MANUAL SQUELCH
 • RB ROGER BEEP TONE
 • HIGH QUALITY CONDENSER
 • MICROPHONE WITH 4-PIN RING
 • CONNECTOR
 • ANL AUTOMATIC NOISE LIMITER
 • QUICK UP / DN CH SELECTION
 • PA FUNCTION
 • EMG EMERGENCY CHANNEL
 • 3W 8Ω FRONT SPEAKER 
 
Specifications
  General
 
Channels Refer to programmed band
Modes (AM, FM) Refer to programmed band
Operating Temp. -10°/+55°C
DC Input Voltage 13.2Vdc ±15%
Size 153(L) x 50(H) x 180(D) mm
Weight 1 Kg

   TRANSMITTER
System CPU Controlled PLL
Synthesizer
Max Output Power 4W at 13.2Vdc
Modulation AM (from 85% to 95%)
FM (1.8 KHz ±0.2 KHz)
Output Impedanced 50 Ohm unbalanced
Current Drain 1100 mA (at no modulation)

   RECEIVER
System CPU Controlled Double
Conversion Super
Heterodyne
IF 1° 10.695 MHz / 2° 455 KHz
Sensitivity 0.5µV for 20dB SINAD (FM)
0.5µV for 20dB SINAD (AM)
Audio Output Power @10% THD 2.5W at 8 Ohm
Audio Distorsion <8% at 1 KHz
Image Rejection 65dB
Adjacent Ch. Rejec. 65dB
Signal/Noise Ratio 45dB
Current Drain 250mA (stand-by) 

imagini aditionale